Print - AMX LCD Mini-Touch Panels Instruction Manual

Note
You can reset the password
number with the PAGE
PASSWORD button in the
Protected Setup page.
Figure 133
Start or quit decision box
86 Mini-Touch Panel Program Reference
• ENTER
Sets the page flip to the new page.
Press the new button to open the page password keypad.
Type 1988 (system default), or your personal page password, and press ENTER to
flip to the new page.
• CLEAR
Clears the keypad number.
• ENTER
Sets the page password number, closes the keypad, and flips to the
new password-protected page. The password-protected page will not open if
you enter the wrong password.

Print

Press the PRINT option to open a decision box and send a printable image of the
current page to a PC via the AXlink or RS-232 4-pin header on the mini-touch panel.
The PC must be running the or TPDesign software programs before you send the
print file. Refer to TPDOC or TPDesign instruction manuals for more information.
• YES
Receives the PC file over the AXlink connector on the mini-touch panel,
and opens the decision box in Figure 133.
• NO
Receives the PC file over the RS-232 4-pin header on the mini-touch
panel (UniMount, rack-mount, and wood panels only), and opens the decision
box in Figure 133.
PRESS YES TO START.
YES
PRESS NO TO QUIT.
• YES
Sends the print file to the PC. The mini-touch panel returns to the page
assigned as the startup page when the file transfer is complete.
• NO
Cancels the file transfer and returns to the current page.
NO
Black/White LCD Mini-Touch Panels