Wiring The Mini-Touch Panels - AMX LCD Mini-Touch Panels Instruction Manual

Figure 12
TiltScreen mini-touch panel
connectors (rear view)
Figure 13
Rack-mount mini-touch panel
connectors (top view)
Black/White LCD Mini-Touch Panels

Wiring the Mini-Touch Panels

The TiltScreen mini-touch panels use a mini-XLR (male) connector for power and
data communications. The UniMount and rack-mount mini-touch panels use a 4-pin
(male) AXlink connector for power and data. Figure 12 shows the rear panel AXlink
connector on the TiltScreen mini-touch panel. Figure 13 shows the rear panel AXlink
connector on the rack-mount mini-touch panel. Figure shows the AXlink , and RS-
232 connectors on the AXW-MLC (/PB) mini-touch panel' s circuit card.
4-pin (male) AXlink connector
Rear view
Mini-XLR 4-pin (male) AXlink and
power connector
Top view
Installing the Mini-Touch Panel 13