Appendix G Dbcs Support; Configuring The As/400 Host, 5494 Cu Mode - Axis 5470e User Manual
High performance multi-protocol print servers for virtually all networks
Hide thumbs
Also See for AXIS 5470e:
- User manual (267 pages) ,
- Specification (6 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
AXIS 5470e/570/670e User's Manual
Appendix G DBCS Support
Important !
Configuring the AS/400 Host, 5494 CU mode
The AXIS 5470e/570/670e supports Double-Byte Character Set
(DBCS) for SNA and TN5250E printing. This facilitates printing
from an IBM AS/400 host system for languages employing
double-byte character sets.
The following Chinese, Japanese and Korean DBCS tables are used in
the AXIS 5470e/570/670e:
Country
Korea (KS)
Korea (KSSM)
Japan
China
AXIS 5470e/570/670e Double-byte Character Tables
The AXIS 5470e/570/670e supports SNA DBCS printing in IBM
5494 emulation only.
Follow the instructions below to configure the AS/400 Host for
DBCS support:
1. Type WRKSYSVAL on the AS/400 command line and press
Enter.
2. Check that the DBCS version installed indicator (QIGC) sysval is
set to 1 (on).
3. Check that the QIGCCDEFNT sysval is set to a DBCS font
installed in the system.
4. Proceed with the steps detailed in The AS/400 Host System
Checklist, on page 46.
Appendix G: DBCS Support
Printer Emulation
5x27_002_TX_KS
5x27_002_TX_KSSM
5x27_001_TX
5x27_005_TX
Character Table
KS
KSSM
Shift - JIS
GB
275
Advertisement
Table of Contents
