Axis 5470e User Manual page 147

AXIS 5470e/570/670e User's Manual
Client-Server Printing:
Server Setup
2. In the Port menu, click Add.
3. In the NPS Port list, select the AXIS 5470e/570/670e port. The
port appears as <name>.LP1, where <name> is AX followed by
the last six digits of the AXIS 5470e/570/670e serial number, e.g.
AX100086.
4. Accept or change the suggested Windows port name and type any
required comment in the Description field. Make a note of the
Windows port name as you will need this later, then click OK to
install the Windows port.
5. In the Port menu, click Connect... to bring up the Windows
Printers dialog.
6. Select a printer driver from the list of Installed Printers (or click
Add>> to install a new driver), then click Connect...
7. Select the Windows port name from step 4 above (this name can
be found at the bottom of the Ports list).
8. Click OK to close the Connect dialog, and Close to close Printers.
The setup is completed and you can now print through your
AXIS 5470e/570/670e.
Notes:
• AXIS Print Utility for Windows must be running when you print through your
AXIS 5470e/570/670e. It is strongly recommended that you copy the AXIS
Print Utility icon into your StartUp folder.
• To enable TCP/IP printing in Windows 3.1 and Windows for Workgroups
environments, you must use a shareware LPR spooler that can be
downloaded from ftp://ftp.axis.com/pub/axis/software/prt_srv/utility/wlprs/.
Follow the instructions below to install your AXIS 5470e/570/670e
.
for client-server printing at a Windows for Workgroups server:
1. Choose a workstation that you want to use as a server for network
printing. The server must be available at all times and must have
sufficient hard disk space for spooling print jobs.
2. Open Network Setup, click Sharing..., check the I want to be
able to allow others to print to my printer(s) box.
Section 7: Setting Up - Windows
147