Section 9 Setting Up - Macintosh; Installation Using The Chooser Window - Axis 5470e User Manual

AXIS 5400 User's Manual

Section 9 Setting Up - Macintosh

Installation Using the Chooser Window

Basic Configuration
Having connected the AXIS 5470e/570 to your network, this section
now describes how to set up your AXIS 5470e/570 for printing in
Macintosh environments using AppleTalk.
Note:
The AXIS 670e does not support the Apple Token Talk environment.
If you intend to operate your AXIS 5470e/570 in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 6 Setting Up - NetWare, on page 110
Section 7 Setting Up - Windows, on page 125
Section 8 Setting Up - OS/2, on page 151
Section 10 Setting Up - UNIX, on page 163
Section 12 IPP (Internet Printing Protocol), on page 203
Basic configuration in AppleTalk is performed simply by opening the
Chooser window and selecting a printer.
You can change the default name of your AXIS 5470e/570 or any of
default parameters by editing the config file. To access the config file
from a Macintosh, you can use:
• any Java enabled Web browser
• FTP using MacTCP, Fetch or Anarchie
In order to use any of the methods, you must assign an IP address to
the AXIS 5470e/570 as described in Setting Parameters, on page 161.
Section 9: Setting Up - Macintosh
157