The Parameter List; Appendix B The Parameter List; Changing The Configuration Parameters - Axis 540 User Manual

Appendix B The Parameter List

Changing the Configuration Parameters

Using
AXIS NetPilot™
AXIS 540/640 User's Manual
This appendix provides an overview of the AXIS 540/640 parameters
and describes how they may be edited. A sample parameter list is also
included. However, please note that because of recent print server
software updates, some differences may exist between the parameters
installed on your print server and those that are described within this
document.
Please refer to the AXIS Network Print Server Technical Reference for
a complete description of the parameters. Alternatively, you may wish
to access the Axis WWW Home Page at http://www.axis.com/, where
you can download the latest technical information. For details of the
appropriate WWW address in your region, please refer to the back of
the manual cover.
All parameter settings are stored in the AXIS 540/640 config file,
which may be edited via the Property Pages of the AXIS NetPilot™
software. Each Property Page comprises an array of selection tabs that
are appropriate to your operating environments. Each parameter may
be defined by using the relevant box.
The parameters can also be edited by using the Parameter Editor,
which is started from within AXIS NetPilot™.
For further information on the AXIS NetPilot™, please refer to
Section 4 Setting Up - NetWare.
Appendix B: The Parameter List
115