Axis Print System Overview - Axis 5470e User Manual

Section 7: Setting Up - Windows
126

AXIS Print System Overview

If you intend to use the AXIS 5470e/570/670e in a multiprotocol
environment, you should also refer to the following sections:
Section 6 Setting Up - NetWare, on page 110
Section 8 Setting Up - OS/2, on page 151
Section 9 Setting Up - Macintosh, on page 157
Section 10 Setting Up - UNIX, on page 163
Section 12 IPP (Internet Printing Protocol), on page 203
Note:
AXIS Print System requires AXIS firmware version 6.0 or higher in your AXIS
5470e/570/670e print server. Visit the Axis web site http://www.axis.com for
firmware upgrades.
AXIS Print System is the recommended tool to use for network
printing in Windows 95, Windows 98, Windows NT 4.0 and
Windows 2000. AXIS Print System allows Axis Network Print Servers
to be connected in the same simple fashion as a local printer port.
AXIS Print System has been developed for peer-to-peer printing,
allowing your print jobs to be sent directly to the AXIS
5470e/570/670e.
Notes:
• AXIS Auto-Go is a printing utility that contains AXIS IP-Installer, AXIS Print
System and AXIS Print Monitor. AXIS Auto-Go can be down-loaded from
the Axis web site: http://www.axis.com.
• You can install AXIS Print System as a Custom Version (recommended for
Network Administrators) or a Typical Version (recommended for regular
users.) The difference between them is that the Custom Version includes an
IP settings application called AXIS IP Installer.
AXIS 5470e/570/670e User's Manual