Appendix A Test Button - Axis 5470e User Manual

AXIS 5470e/570/670e User's Manual

Appendix A Test Button

The Test Page
The Parameter List
The test button is located on the front right hand side of the AXIS
5470e/570/670e and is used for:
• Printing a test page, checking the connection to the printer.
• Printing a parameter list, showing the AXIS 5470e/570/670e cur-
rent settings.
• Resetting the AXIS 5470e/570/670e parameters to the factory
default settings.
Press the test button once to print a test page. If the test page prints,
the parallel interface is functioning correctly. The printed Test Page
contains basic information about the AXIS 5470e/570/670e. It is
recommended that you print a test page every time you have
connected the AXIS 5470e/570/670e to a printer.
Note:
AXIS 570/670e:
The test page is printed on LPT1 by default. If you want to print the test page on
LPT2 instead, you should set the Internal Printout Destination parameter to
LPT2.
Press the test button twice to print a parameter list showing the
current AXIS 5470e/570/670e settings. This list provides
comprehensive details of all the parameters and their current status.
Refer to Appendix A - The Parameter List, on page 285.
If you want to change any of the parameters, use one of the methods
that are described in Section 11 Management & Configuration, on
page 169.
Appendix A: Test Button
301