Axis 5470e User Manual page 39

AXIS 5470e/570/670e User's Manual
Using ARP in UNIX
AXIS 5470e/570
Ethernet
Print Servers:
AXIS 670e
Token Ring
Print Servers:
Follow the instructions below to set the IP address using ARP.
Type the following commands in the shell window:
arp -s <host name> <Ethernet address> temp
ping <host name>
Example:
arp -s npsname 00:40:8c:10:00:86 temp
ping npsname
The host will return
npsname is alive,
indicates that the address has been set and that communication is
established.
Notes:
•
The Ethernet address
located on the underside label of the AXIS 5470e/570.
• The ARP command varies between different UNIX systems. Some BSD type
systems expect the host name and node address in reverse order.
Furthermore IBM AIX systems will require the additional argument ether.
Example:
arp -s ether <host name> 00:40:8c:10:00:86 temp
• When you execute the ping command for the first time, you may experience
a significantly longer response time than usual.
Type the following commands in the shell window:
arp -s 802.5 <host name> <node address> temp
ping <host name>
Example:
arp -s 802.5 npsname 00:02:31:48:00:61 temp
ping npsname
The host will return
npsname is alive,
indicates that the address has been set and that communication is
established.
Section 3: Basic Installation
or a similar message. This
is equal to the serial number, which is
or a similar message. This
39