Using Axis Thinwizard - Axis 5470e User Manual

AXIS 5470e/570/670e User's Manual

Using AXIS ThinWizard

Installing AXIS
ThinWizard
Starting AXIS
ThinWizard
AXIS ThinWizard is a management tool that allows you to manage
and upgrade ThinServer products. You can find, monitor and upgrade
your Axis print servers remotely in any TCP/IP network using a
standard Web browser.
The internal Web pages of Axis ThinServer products integrate directly
into AXIS ThinWizard, giving you access to the services described in
Using a Web browser on page 170.
Once you have established the AXIS 5470e/570/670e in the TCP/IP
environment, as described in Assigning an IP address on page 32, you
can access the AXIS 5470e/570/670e from AXIS ThinWizard.
You should only install AXIS ThinWizard on a designated server on
your network. When you want to use the AXIS ThinWizard for
management purposes, you just access the server via any standard Web
browser.
The AXIS ThinWizard software is available on the AXIS Product CD.
Follow the instructions below to start the AXIS ThinWizard:
1. Make sure that the server where you installed AXIS ThinWizard is
up and running on your network.
2. Start a Web browser from a client in your network.
3. Enter the IP address or the host name of the server where you
installed AXIS ThinWizard. If the server is installed on another
port than 80, you must enter the port name after the host name or
the IP address.
Section 11: Management & Configuration
175