Table of Contents
Advertisement
Section 20
DBCS Support
Important!
Configuring the AS/400 Host, 5494 CU mode
Configuring the Axis Network Print Server
AXIS 5570e User's Manual
The Axis Network Print Server supports Double-Byte Character Set
(DBCS) for SNA and TN5250E printing. This facilitates printing from an
IBM AS/400 host system for languages employing double-byte character
sets.
The following Chinese, Japanese and Korean DBCS tables are used in the
Axis Network Print Server:
Country
Korea (KS)
Korea (KSSM)
Japan
China
Axis Network Print Server Double-byte Character Tables
The Axis Network Print Server supports SNA DBCS printing in IBM 5494
emulation only.
Follow the instructions below to configure the AS/400 Host for DBCS
support:
1. Type WRKSYSVAL on the AS/400 command line and press Enter.
2. Check that the DBCS version installed indicator (QIGC) sysval is set to 1 (on).
3. Check that the QIGCCDEFNT sysval is set to a DBCS font installed in the
system.
4. Proceed with the steps detailed in The AS/400 Host System Checklist, on
page 22.
A number of printer emulations exist for DBCS printing. To set the correct
system language and printer driver, refer to the tables below and enter the
values in the IBM Configuration Wizard.
Country
Printer Emulation
Korea (KS)
5x27_002_TX_KS
Korea (KSSM)
5x27_002_TX_KSSM
Japan
5x27_001_TX
China
5x27_005_TX
Printer Emulation and System Language for Country options
Printer Emulation
5x27_002_TX_KS
5x27_002_TX_KSSM
5x27_001_TX
5x27_005_TX
DBCS Support
Character Table
KS
KSSM
Shift - JIS
GB
System Language
833
833
290
836
197
Advertisement
Table of Contents
