Axis 5470e User Manual page 91

AXIS 5470e/570/670e User's Manual
Modifying the
TCP/IP profile
ACBPOOLSIZE
ADDRESSTRANSLATIONPOOLSIZE
CCBPOOLSIZE
DATABUFFERPOOLSIZE
ENVELOPEPOOLSIZE
IPROUTEPOOLSIZE
LARGEENVELOPEPOOLSIZE
RCBPOOLSIZE
SCBPOOLSIZE
SKCBPOOLSIZE
SMALLDATABUFFERPOOLSIZE
TCBPOOLSIZE
TINYDATABUFFERPOOLSIZE
UCBPOOLSIZE
KEEPALIVEOPTIONS
GATEWAY
; * Network
The TCP/IP profile contains system configuration statements used to
initialize the TCP/IP address space. Among those statements, the
following are subject to special considerations when you are printing
from PSF on TCP/IP-attached printers:
• DATABUFFERPOOLSIZE
• SMALLDATABUFFERPOOLSIZE
• TINYDATABUFFERPOOLSIZE
• KEEPALIVEOPTIONS
• GATEWAY
Below is an excerpt from an example TCP/IP Profile (not a complete
profile) . Examples of the statements above are printed in bold:
INTERVAL
First Hop
10 =
DEFAULTNET 10.10.12.1 BPCLAN
Note:
If you change any of the values in the TCP/IP profile, you must restart TCP/IP to
activate the new settings.
Section 5: Setting Up - IBM Mainframe
1000
1500
150
160 32768
750
300
50
50
256
256
256
512
256
100
10 SENDGARBAGE FALSE
Linkname Packet Size Subnet mask
BCPLAN 2000
2000
ENDKEEPALIVEOPTIONS
Subnet value
255.255.255.0 10.10.12.0
255.255.255.0 0
91