Axis 5470e User Manual page 102

Section 5: Setting Up - IBM Mainframe
102
Device Statement
JUNIT
MODE
PM
WC
AXIS 5470e/570/670e User's Manual
Explanation
Specifies:
1. The device address (host-connected, channel-attached, non-SNA
printers only). Do not specify a device address for the AXIS
5470e/570/670e when using TCP/IP attachment.
2. The name of the processor to which the device is attached
3. A destination class for messages about the device
4 .Whether the device is initially online or offline
This parameter is required.
Specifies that the printer is managed by an FSS. This parameter is
required.
Specifies which data-set processing mode is supported. For the AXIS
5470e/570/670e attached to Postscript printers, the correct setting is
PRMODE=(LINE,PAGE,)
line data sets can be printed.
Specifies the print output class that the printer is to process. You may
want to consider handling disabled mechanisms by defining print
classes.
, indicating that composed-page and