Axis 5470e User Manual page 115

AXIS 5470e/570/670e User's Manual
Print Server Name
Environments
SNA
NetWare NDS
The IP address
The AXIS NetPilot Installation Wizard will guide you through the
installation process. The following options are available:
Note:
The number of options varies according to the number of environments you
enable.
The default print server name consists of the characters 'AXIS'
followed by the last six digits of the serial number. If you want to
change the print server name, just type the new name in the available
text field.
Choose which networking environments you want to configure the
AXIS 5470e/570/670e for, i.e. SNA, NetWare, TCP/IP, Windows &
OS/2 or AppleTalk. If your network comprises various different
platforms, you can enable any combination of environments.
Note:
AppleTalk is only available for the AXIS 5470e/570.
Select the emulation mode for the AXIS 5470e/570/670e. The
supported modes are 3174 (Mainframe) and 5494 (AS/400). You
should also provide the valid emulation settings.
Place NetWare Print Queues on a specific bindery server, or
alternatively into an NDS Tree.
Choose the method the AXIS 5470e/570/670e should employ for
obtaining an IP address. DHCP, ARP, RARP and BOOTP are
supported. You can also set the IP address manually. Refer to
Assigning an IP address, on page 32 for further information about
setting the IP address.
Section 6: Setting Up - NetWare
115