10.1.13.1 no spanning-tree forceversion
This command sets the Force Protocol Version parameter to the default value, i.e. 802.1s.
▫
Format
no spanning-tree forceversion
▫
Mode
Global Config
10.1.14 spanning-tree forward-time
This command sets the Bridge Forward Delay parameter to a new value for the common and internal
spanning tree. The forward-time value is in seconds within a range of 4 to 30, with the value being
greater than or equal to "(Bridge Max Age / 2) + 1".
▫
Default
15
▫
Format
spanning-tree forward-time <4-30>
▫
Mode
Global Config
10.1.14.1 no spanning-tree forward-time
This command sets the Bridge Forward Delay parameter for the common and internal spanning tree to
the default value, i.e. 15.
▫
Format
no spanning-tree forward-time
▫
Mode
Global Config
10.1.15 spanning-tree hello-time
This command sets the Hello Time parameter to a new value for the common and internal spanning tree.
The hellotime <value> is in whole seconds within a range of 1 to 10 with the value being less than or
equal to "(Bridge Max Age / 2) - 1".
▫
Default
2
▫
Format
spanning-tree hello-time <1-10>
▫
Mode
Global Config
10.1.15.1 no spanning-tree hello-time
This command sets the Hello Time parameter for the common and internal spanning tree to the default
value, i.e. 2.
▫
Format
no spanning-tree hello-time
▫
Mode
Global Config
10.1.16 spanning-tree max-age
This command sets the Bridge Max Age parameter to a new value for the common and internal spanning
tree. The max-age value is in seconds within a range of 6 to 40, with the value being less than or equal to
"2 times (Bridge Forward Delay - 1)".
▫
Default
20