Spanning-Tree Mst - Planet WGSW-24000 User Manual

▫ Format spanning-tree max-age <6-40>
▫ Mode Global Config
10.1.16.1 no spanning-tree max-age
This command sets the Bridge Max Age parameter for the common and internal spanning tree to the
default value, i.e. 20.
▫ Format no spanning-tree max-age
▫ Mode Global Config

10.1.17 spanning-tree mst

This command sets the Path Cost or Port Priority for this port within the multiple spanning tree instance or
in the common and internal spanning tree. If the <mstid> parameter corresponds to an existing multiple
spanning tree instance, then the configurations are done for that multiple spanning tree instance. If
however 0 (defined as the default CIST ID) is passed as the <mstid>, then the configurations are
performed for the common and internal spanning tree instance.
If the 'cost' token is specified, this command sets the path cost for this port within a multiple spanning tree
instance or the common and internal spanning tree instance, depending on the <mstid> parameter. The
pathcost can be specified as a number in the range of 1 to 200000000 or auto. If "auto" is specified, the
pathcost value will be set based on Link Speed.
If the 'port-priority' token is specified, this command sets the priority for this port within a specific multiple
spanning tree instance or the common and internal spanning tree instance, depending on the <mstid>
parameter. The port-priority value is a number in the range of 0 to 240 in increments of 16.
▫ Default cost : auto
▫ port-priorty : 128
▫ Format spanning-tree mst <mstid> {cost {<1-200000000> | auto} | port-priority <0-240>}
▫ Mode Interface Config
10.1.17.1 no spanning-tree mst
This command sets the Path Cost or Port Priority for this port within the multiple spanning tree instance or
in the common and internal spanning tree to the respective default values. If the <mstid> parameter
corresponds to an existing multiple spanning tree instance, then the configurations are done for that
multiple spanning tree instance. If however 0 (defined as the default CIST ID) is passed as the <mstid>,
then the configurations are performed for the common and internal spanning tree instance.
If the 'cost' token is specified, this command sets the path cost for this port within a multiple spanning tree
instance or the common and internal spanning tree instance, depending on the <mstid> parameter, to the
default value, i.e. a pathcost value based on the Link Speed.
If the 'port-priority' token is specified, this command sets the priority for this port within a specific multiple
spanning tree instance or the common and internal spanning tree instance, depending on the <mstid>