Vlan Port Pvid All; Vlan Port Tagging All; Vlan Protocol Group; Vlan Protocol Group Add Protocol - Planet WGSW-24000 User Manual

to ports that are members of that VLAN.
▫ Format no vlan port ingressfilter all
▫ Mode Global Config

7.6.73 vlan port pvid all

This command changes the VLAN ID for all interfaces.
▫ Default 1
▫ Format vlan port pvid all <1-4094>
▫ Mode Global Config
7.6.73.1 no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.
▫ Format no vlan port pvid all <1-4094>
▫ Mode Global Config

7.6.74 vlan port tagging all

This command configures the tagging behavior for all interfaces in a VLAN to enabled. If tagging is
enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as untagged
frames. The ID is a valid VLAN identification number.
▫ Format vlan port tagging all <1-4094>
▫ Mode Global Config
7.6.74.1 no vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to disabled. If tagging is
disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN identification number.
▫ Format no vlan port tagging all <1-4094>
▫ Mode Global Config

7.6.75 vlan protocol group

▫ This command adds protocol-based VLAN group to the system. The <groupName> is a character
string of 1 to 16 characters. When it is created, the protocol group will be assigned a unique
number that will be used to identify the group in subsequent commands.
Format vlan protocol group <groupname>
▫ Mode Global Config

7.6.76 vlan protocol group add protocol

This command adds the <protocol> to the protocol-based VLAN identified by <groupid>. A group may
have more than one protocol associated with it. Each interface and protocol combination can only be