9.1.7.1 no dot1x max-req
This command sets the maximum number of times the authenticator state machine on this port will
transmit an EAPOL EAP Request/Identity frame before timing out the supplicant to the default value, i.e.
2.
▫
Format
no dot1x max-req
▫
Mode
Interface Config
9.1.8 dot1x port-control
This command sets the authentication mode to be used on the specified port. . The control mode may be
one of the following.
▫
force-unauthorized: The authenticator PAE unconditionally sets the controlled port to
unauthorized.
▫
force-authorized: The authenticator PAE unconditionally sets the controlled port to authorized.
▫
auto: The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication server.
▫
Default
auto
▫
Format
dot1x port-control {force-unauthorized | force-authorized | auto}
▫
Mode
Interface Config
9.1.8.1 no dot1x port-control
This command sets the authentication mode to be used on the specified port to 'auto'.
▫
Format
no dot1x port-control
▫
Mode
Interface Config
9.1.9 dot1x port-control All
This command sets the authentication mode to be used on all ports. The control mode may be one of the
following.
▫
force-unauthorized: The authenticator PAE unconditionally sets the controlled port to
unauthorized.
▫
force-authorized: The authenticator PAE unconditionally sets the controlled port to authorized.
▫
auto: The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication server.
▫
Default
auto
▫
Format
dot1x port-control all {force-unauthorized | force-authorized | auto}
▫
Mode
Global Config
9.1.9.1 no dot1x port-control All
This command sets the authentication mode to be used on all ports to 'auto'.
▫
Format
no dot1x port-control all