Flow Of Scan Operation - Konica Minolta C350 User Manual

Using the Scan Functions

8.11.1 Flow of Scan Operation

Procedure
1
Using PageScope Web Connection, specify the e-mail settings, and
enter the subject and text of the e-mail.
"Setting the E-mail Transmission" on page 8-66 and "Setting the E-
mail Subject and Text" on page 8-69
2
Using PageScope Web Connection, perform one-touch key
registration or temporary key registration.
(You can also enter the e-mail address directly from this machine's
control panel in step 3.)
"Registering Destinations in Advance" on page 8-25
3
Using this machine's control panel, specify the destination of the
scanned data.
"Setting the Destination" on page 8-70
4
Using this machine's control panel, set the scan mode and document
designation.
"Scan Mode Screen" on page 8-14 and "Original Setting Screen" on
page 8-16
5
Set the document, and then press the [Start] key on this machine's
control panel.
The document is scanned. The scanned data is sent using Internet
fax.
Memo
If the e-mail settings, the setting of the subject and text of the e-mail,
and the registration of the destination are already done, perform steps
3 through 5.
C350
8
8-65