Konica Minolta C350 User Manual page 188

Job Management
11.1.3 Store to HDD
If "Store to HDD" is specified and a job is printed, the job is saved on this
machine's hard disk. The job is not printed until it is recalled to the memory
from the hard disk using this machine's control panel, and its storage is
cancelled after it is changed to a "Job Stored" job.
The data held on the hard disk is not cleared, even if this machine is
turned off.
Note
To use the "Store to HDD" setting, an optional hard disk must be
installed in this machine.
Setting the printer driver
1
In the printer driver setup dialog box, click the "Job Management" tab.
2
Select "Store to HDD" from the
Operations on this machine
1
From the control panel, touch [Job Control], then [HDD] to display the
list of jobs stored on the hard disk.
2
From the job list, select the job that you wish to recall from the hard
disk to the memory, and then touch [Open Job].
The job is recalled to the memory, and its status is set to "Job Stored".
3
From the control panel, touch [Job Control], then [Hold Job] to display
the stored job.
4
Select the job you wish to print, and then touch [OK].
The job status changes to "Waiting Print", and the job is queued to be
printed.
For details, refer to the User's Manual of this machine.
You can check the status of the job from the Job Log screen.
C350
Store Job drop-down list.
11
11-3