Konica Minolta C350 User Manual page 292

Troubleshooting
Symptom
Stapling cannot be
performed.
The stapling position
is not as expected.
The hole punch
function cannot be
specified.
The pages are not
punched.
The hole punch
position is not as
expected.
The folding function
cannot be specified.
The image is not
printed properly.
Paper is not fed from
the specified paper
source.
The access number
cannot be specified.
C350
Probable Cause
Number of pages that can be
stapled when FS-501 is
installed: Up to 30 pages
Number of pages that can be
stapled when FS-601 is
installed: Up to 50 pages on
Letter/A4 or smaller paper, and
up to 25 pages on Legal/B4 or
larger paper
Number of pages that can be
center-stapled when FS-601 is
installed: Up to 10 pages
Stapling is not possible if the
document contains pages of
different sizes.
The orientation setting is not
correct.
Hole punching cannot be
specified if "Booklet",
"Transparency", "Thick2",
"Thick3", or "Envelope" is
selected.
Printed pages may be fed out
without being punched if the
paper is loaded into the paper
source with an incorrect
orientation.
The orientation setting is not
correct.
FS-601 must be installed in
order to specify the folding
function. FS-601 must be
selected on the "Device Option
Setting" tab.
Folding cannot be specified
together with stapling or "Thick".
Available memory space is not
sufficient.
Paper will not be fed from the
specified paper source if that
paper source is loaded with
paper of a different size or
orientation.
To specify access numbers, an
optional hard disk and an
optional 256 MB memory must
be installed on this machine. In
addition, the hard disk must be
added in the "Device Option
Setting" tab of the printer driver.
Action
Change the Copies setting.
Check the document.
Check the stapling position on
"Page Layout" of the printer
driver setup dialog box.
Check each setting in the printer
driver.
Check the orientation setting.
Check the punch position on
"Page Layout" of the printer
driver setup dialog box.
Select FS-601 on the "Device
Option Setting" tab of the printer
driver.
Check each setting in the printer
driver.
Simplify the image to reduce the
data size.
Load the paper source with
paper of the appropriate size
and orientation.
• Add the necessary options.
• Add the hard disk in the
"Device Option Setting" tab of
the printer driver.
14
14-3