Using the Scan Functions
8.10
Performing Scan to HDD Operations
The Scan to HDD operation is used to save the scanned image data to a
box on the hard disk installed in this machine. The image data saved to
the hard disk can be downloaded to the computer using PageScope Web
Connection.
Note
To use this scan function, an optional hard disk must be installed in
this machine.
Memo
The data scanned and saved to the hard disk here can also be
transferred. For details, refer to "10 Using the Box Functions".
8.10.1 Flow of Scan Operation
Procedure
1
Using PageScope Web Connection, create a user box for saving the
scanned data.
"Creating User Boxes" on page 8-57
2
As necessary, set the storage period for scanned data.
"Setting the Storage Period of the Scanned Data" on page 8-59
3
Using PageScope Web Connection, perform one-touch key
registration or temporary key registration.
"Registering Destinations in Advance" on page 8-25
4
Using this machine's control panel, specify the destination of the
scanned data.
"Setting the Destination" on page 8-60
5
Using this machine's control panel, set the scan mode and document
designation.
"Scan Mode Screen" on page 8-14 and "Original Setting Screen" on
page 8-16
C350
8
8-55