Adding A Cover And/Or Interleaf When Printing - Konica Minolta C350 User Manual

5
5.11

Adding a Cover and/or Interleaf When Printing

A front cover and/or back cover can be added to each of the copy sets.
Also, when printing on overhead projector transparencies, an interleaf can
be inserted between the transparencies.
Setting procedure
1
Click the "Setup" tab.
2
Click the [Detail of Paper Source] button under
display the detailed settings dialog box.
3
Specify the desired settings.
Cover Page
A front cover and/or back cover can be added to each of the copy sets.
You can also select to print data on the covers or leave them blank.
Front Cover Page
With Image
Front Cover Page Source
Back Cover Page
With Image
Back Cover Page Source
OHP Interleaving
When printing on overhead projector transparencies, interleaves can be
inserted between the transparencies.
OHP Interleaving
OHP Interleaving Paper Source
Note
When using the "OHP Interleaving" function, specify "1" in
When printing on overhead projector transparencies, only the multiple
bypass tray or the 1st drawer can be set as the paper source.
The "OHP Interleaving" function cannot be used in combination with
duplex printing.
For details on loading overhead projector transparencies into the paper
source, refer to the User's Manual supplied with this machine.
5-18
Setting Up the Printer Driver
Adds a front cover.
Prints data on the front cover.
Specifies the paper source for the front cover.
(Tray 1 to 4, or LCC)
Adds a back cover.
Prints data on the back cover.
Specifies the paper source for the back cover.
(Tray 1 to 4, or LCC)
Enables the "OHP Interleaving" function.
Specifies the paper source for the interleaves.
(Tray 2 to 4, or LCC)
Paper Source to
Copies box.
C350