Konica Minolta C350 User Manual page 136

Using the Scan Functions
5
Specify settings for the following.
IP Address
Login Name
Password
Port Number
Directory
Use Proxy
External Server Link
Note
"External Server Link" uses "anonymous" to access the FTP server.
"External Server Link" can be used only when the "Login Name" is set
to "anonymous" on the FTP Server Registration page.
Changing or deleting the FTP server settings does not change the
destination server that is specified for "File (Scan To FTP Server)" of
one-touch key registrations and temporary registration. If you change
or delete an FTP server that was specified using one-touch key
registration or temporary registration, delete the corresponding one-
touch key registration/temporary registration or register the
information again.
C350
Specify the IP address of the FTP server.
Specify the name used to log in to the FTP server (up to 32
alphanumeric characters).
Specify the password used to log in to the FTP server (up to 64
alphanumeric characters).
Specify the FTP port number.
(Normally, use the default value of 21.)
Set the destination directory for storing the scanned data on the
FTP server (up to 128 alphanumeric characters).
(To specify the default folder, enter a "/" (slash).)
Set whether to use a proxy server.
If "Yes" is selected, also specify the proxy server.
Refer to "Setting the Proxy Server" on page 8-51.
If "Yes" is selected, you can access the FTP server by double-
clicking its IP address on the External Server Link page of
PageScope Web Connection. The External Server Link page
can be displayed by clicking "External Server Link" in the menu
on the "File" tab in User mode.
8
8-49