Network Printing in a Windows Environment
6
In Administrator mode of PageScope Web Connection, from the
"Network" tab, select
and then specify the following settings for the printer controller.
❍
Enable NetWare: Select "Enable".
❍
Frame Type:
❍
Bindery/NDS:
❍
Print Server Name:Print server name created in step 4
❍
Print Server Password:
❍
Preferred File Server:
❍
Print Queue Scan Rate:
❍
Mode:
7
Restart this machine (turn it off, then on again).
8
Use the NetWare Server console to load MONITOR.NLM.
9
Select the connection information and, in the active connection
column, check that the created PServer is connected.
C350
Common Setting
–
Select "Auto Detect". (Select the frame type
according to the network environment.)
Select "Bindery".
Specify only when setting from the NetWare
Server.
Name of the file server that connects to
PServer
1 (Change as necessary.)
PServer
NetWare
Configuration,
6
6-15