12
FTP Server – FTP Configuration
You can specify FTP proxy server and FTP server settings.
Procedure
➜
On the "Network" tab, click
Configuration
Proxy IP Address
Port Number
FTP Connection Timeout
Passive Mode
12-62
Using PageScope Web Connection
FTP
Server, and then click
in the sub-menu that appeared.
Enter the IP address of the proxy server when one is used.
Set the port number of the proxy server.
(Normally, use the default value of 21.)
Set the connection timeout for the FTP server.
Settings: 5 to 300 (seconds)
Set the passive mode.
Settings: "Enable" or "Disable"
FTP
C350