12
12.6
Administrator Mode
In Administrator mode, you can configure the system for this machine.
For the procedure for logging in to Administrator mode, refer to "Logging
in to Administrator Mode" on page 12-4.
12.6.1 System Tab
User's Choice – User's Choice 1
You can specify settings for this machine.
Procedure
➜
Click the "System" tab, click
Choice 1
Time (Auto Low Power)
Disable Auto Low Power
and Sleep mode when job
is in memory.
Sleep
Time (Sleep)
Disable Auto Low Power
and Sleep mode when job
is in memory.
12-34
User's
in the sub-menu that appeared.
Set the time until this machine enters Low Power (Power Save)
mode.
Settings: 10 to 240 (minutes)
Set whether this machine will enter Low Power (Power Save)
mode if there are locked jobs or jobs in the memory.
Settings: "Yes" or "No"
Set whether this machine will enter Sleep mode. Displayed
only when the "Disable Sleep Mode" function on this machine
is set to "Yes".
Settings: "Yes" or "No"
Set the time until this machine enters sleep mode.
Settings: 15 to 240 (minutes)
Set whether this machine will enter Sleep mode if there are
locked jobs or jobs in the memory.
Settings: "Yes" or "No"
Using PageScope Web Connection
Choice, and then click
User's
C350