Toshiba Satellite P10 Series Maintenance Manual page 137

4 Replacement Procedures
Installing the Modem / Bluetooth Unit
To install a modem or Bluetooth unit, follow the steps below and refer to the figures in the
preceding section.
1. Turn the computer upside down.
2. Remove two embedded screws securing the modem / Bluetooth unit cover.
3. Lift off the modem / Bluetooth unit cover.
4. If a modem is being fitted, connect the power cable.
If a Bluetooth unit is being fitted, connect the FPC cable.
5. Fit the modem / Bluetooth unit onto its connector and secure with two M2.5×3 screws.
6. Replace the modem / Bluetooth unit cover and secure with two embedded screws.
4-24
4.8 Modem / Bluetooth Unit
Satellite P10 Series Maintenance Manual