Toshiba Satellite P10 Series Maintenance Manual page 150

4.12 Display Assembly
Installing the Display Assembly
To install the display assembly, follow the steps below and refer to the figures in the preceding
section.
4. Seat the display assembly taking care not to crush to the LCD display cable, the LCD
power cable, or wireless LAN antenna.
5. Secure two M2.5x6 black screws to each hinge and two black M2.5x6 black screws to
the computer's back side (which help hold the display assembly in place).
6. Feed the wireless LAN module's antennae wires through the small hole beside the LCD
display cable connector.
7. Connect the LCD power cable to the top chassis.
8. Secure one M2.5.x3 black screw for each hinge cover
9. Reinstall the keyboard, wireless LAN module, and battery.
Satellite P10 Series Maintenance Manual
4 Replacement Procedures
4-37