4 Replacement Procedures
4.8
Modem / Bluetooth Unit
Optional modem and Bluetooth units occupy the same connector so only one can be fitted at a
time. The removal and installation procedures are the same for both.
Removing the Modem / Bluetooth Unit
To remove the installed modem or Bluetooth unit, first remove the battery pack, then follow the
steps below.
1. Turn the computer upside down.
2. Remove two embedded screws securing the modem / Bluetooth unit cover.
3. Lift off the modem / Bluetooth unit cover.
Figure 4-10 Removing the modem / Bluetooth unit cover
4-22
4.8 Modem / Bluetooth Unit
Satellite P10 Series Maintenance Manual