Optical Drive - Toshiba Satellite P10 Series Maintenance Manual

4 Replacement Procedures
4.5

Optical Drive

This computer may be fitted with a:
Disassembling the Optical Drive
To disassemble the optical drive, first remove the drive from its module bay, then follow the
steps below.
1. Remove two black M2×8 screws from the back bracket plate. Remove the back bracket
plate.
2. Remove four black M2×4 screws (two from each side of the drive) securing the main
bracket. Lift off the main bracket.
3. Pull the optical drive board from the rear of the drive.
4-14
DVD-R/-RW device
DVD-ROM device
DVD Multi-drive device
Combo device
Figure 4-5 Removing the bracket screws
4.5 Optical Drive
Satellite P10 Series Maintenance Manual