4.16 System Board
4.16 System Board
Removing the System Board
To remove the system board, first remove the speakers, then follow the steps below.
1. Remove six M2.5×3 black screws securing the system board to the bottom chassis.
2. Remove the one M2.5x6 black screw from the volume board.
3. Remove two M2.5x6 black screws from the module support.
4. Remove the four hexagonal port screws.
5. Remove the system board from the chassis.
Satellite P10 Series Maintenance Manual
Figure 4-24 Removing the system board screws
4 Replacement Procedures
4-45