4 Replacement Procedures
Installing the Top Cover
To install the top cover, follow the steps below and refer to the figures in the preceding section.
1. Seat the top cover and secure the upper FPC and lower FPC cables to the computer's
top chassis.
2. Secure the top cover with three M2.5×6 black screws and two M2.5x3 black screws.
3. Turn the computer upside down and secure the following eleven screws:
•
Three M2×3 black screws in the battery bay
•
Two M2.5x6 black screws from the back.
•
Six M2.5×18 black screws from the sides
4-40
4.13 Top Cover
Satellite P10 Series Maintenance Manual