Toshiba Satellite P10 Series Maintenance Manual page 131

4 Replacement Procedures
Installing the Wireless LAN Unit
To install the wireless LAN unit, follow the steps below and refer to the figures in the
preceding section.
1. Turn the computer upside down and loosen four embedded security screws securing the
wireless LAN compartment cover.
2. Lift off the wireless LAN compartment cover.
3. Fit the wireless LAN unit's connector to the computer's connectors and press carefully
to ensure firm contact.
CAUTION: Do not touch the connectors on the wireless LAN unit or on the
computer. Debris on the connectors may cause malfunction.
4. Gently, push the wireless LAN unit down until the latches engage the unit to hold it in
place.
5. Attach the ends of the wireless LAN antenna. The black antenna cable should be
attached to the connector nearer the rear side of the computer, the white antenna cable to
the connector closer to the front panel.
6. Seat the wireless LAN compartment cover and secure it with the four embedded
security screws.
4-18
4.6 Wireless LAN Unit
Satellite P10 Series Maintenance Manual