Lcd Module - Toshiba Satellite P10 Series Maintenance Manual

4.19 LCD Module

4.19 LCD Module
Removing the LCD Module
To remove the LCD module, first remove the battery pack, display assembly, and display mask,
then follow the steps below.
1. Remove one M2x3 black screw securing the HV cable and the FL cable.
2. Disconnect the HV and FL cables from the FL inverter board.
3. Remove eight M2.5x3 black screws securing the LCD module bracket, then remove
the LCD module bracket.
4. Remove the LCD module.
Satellite P10 Series Maintenance Manual
Figure 4-27 Removing the LCD module
4 Replacement Procedures
4-51