Toshiba Satellite P10 Series Maintenance Manual page 161

4 Replacement Procedures
Installing the Direct Play Button Board
To install the direct play button board, follow the steps below and refer to the figure in the
preceding section.
1. Secure two M2.5x3 black screws to the direct play button board, attaching it to the
front face in the process.
2. Attach the front face to the lower chassis, ensuring that the two front face hooks snap
securely into place.
3. Attach the direct play button FFC to the system board.
4-48
4.17 Direct Play Button Board
Satellite P10 Series Maintenance Manual