Toshiba Satellite P10 Series Maintenance Manual page 163

4 Replacement Procedures
Installing the Display Mask
To install the display mask, follow the steps below and refer to the figures in the preceding
section.
1. Seat the display mask and secure the snaps on each side.
2. Secure the display mask with two M2×6 black screws at the top outer corner of the
display assembly and another two M2.5×6 screws at the bottom inner corner.
3. Cover the secured screws with mask seals.
4-50
4.18 Display Mask
Satellite P10 Series Maintenance Manual