Operating The Quad-Link Retractable Mount - Invacare Pronto M50 Owner's Manual

SECTION 12—ELECTRONICS
Arm

Operating the Quad-Link Retractable Mount

NOTE: For this procedure, refer to FIGURE 12.6.
1. To retract the joystick from the normal extended position, push outward on the inside
surface of the joystick until the quad-link is free.
NOTE: Quad-links work the best when the joystick is pushed outward on the inside (medial)
surface of the joystick, near the armrest pad.
2. Push the joystick outward and rearward until the quad-link moves through its
complete range and clicks into its fully retracted position.
3. To return the joystick to the normal extended position, push outward on the inside
surface of the joystick until the quad-link clicks free.
4. Push the joystick forward and inward until the quad-link moves through its complete
range and clicks into its fully extended position.
DETAIL "A" - QUAD LINK MOUNT IN
EXTENDED POSITION
Top View
Arm
FIGURE 12.6 Operating the Quad-Link Retractable Mount
Pronto® M50™, M51™and M61™with SureStep™
Quad Link Retractable Mount
FIGURE 12.5 Adjusting Lock/Release Tension
Push Here
Quad Link
Retractable
Mount
Joystick
Bottom View
DETAIL "B" - QUAD LINK MOUNT
IN RETRACTED POSITION
Top View
Joystick
Arm
Joystick
92
Ball Plunger
Locknut
Quad Link
Retractable Mount
Push Here
Part No. 1125085