Positioning Flip Back Armrests For Use; Adjusting Height - Invacare Pronto M50 Owner's Manual

Positioning Flip Back Armrests for Use

1. Make sure the flip back armrest release lever is in the up (horizontal) position.
2. Install the flip back armrest into the front arm socket.
3. Lock flip back armrest by pressing flip back armrest release lever into the down
(vertical) position.
4. Lift up on flip back armrest to make sure the armrest is locked in place.
5. Repeat STEPS 1-4 for opposite flip back armrest, if necessary.

Adjusting Height

1. Unlock top of flip back armrest by pulling height adjustment lever into the up
(horizontal) position.
2. Adjust top of the flip back armrest to the desired height.
3. Lock top of flip back armrest by pushing height adjustment lever into the down
(vertical) position.
4. Lift up on flip back armrest to make sure the armrest is locked in place.
5. Repeat STEPS 1-4 for opposite flip back armrest, if necessary.
Height
Adjustment
Lever
Flip Back Armrest
Armrest Release Lever
Front Arm Socket
FIGURE 6.6 Positioning/Adjusting Flip Back Armrests
Part No. 1125085
Height
Adjustment
Lever
47
Pronto® M50™, M51™and M61™with SureStep™
SECTION 6—ARMS
Locked
(Vertical)
Unlocked
(Horizontal)