Using The Horn; M50 And M51 Wheelchairs; M61 Wheelchairs; Elevating The Seat - Invacare Pronto M50 Owner's Manual

SECTION 5—WHEELCHAIR OPERATION

Using the Horn

M50 and M51 Wheelchairs

NOTE: For this procedure, refer to
FIGURE 5.6.
1. Press the horn button located above the
information gauge on the joystick
housing.

M61 Wheelchairs

NOTE: For this procedure, refer to
FIGURE 5.7.
1. Press the horn button located in the
center of the speed indicator. The horn
will sound for as long as the button is
pressed.

Elevating the Seat

DO NOT operate wheelchair on an incline while in an elevated position. Otherwise,
the wheelchair may tip over and injury or damage may occur.
DO NOT operate the elevate function near or under a fixed object such as a table
or desk.
Use only the MK5™NX w/ACC controller to activate the elevate function. DO NOT
use any other actuator controls. Such devices may result in excess heating and
cause damage to the actuator and associated wiring and could cause a fire, death,
physical injury or property damage. If such devices are used, Invacare shall not be
liable and the limited warranty is void.
The elevated seat option is equipped with a speed reduction safety mechanism.
While the seat is in an elevated position, the safety feature slows the speed of the
wheelchair by 80%. If the wheelchair operates at maximum speed while in an ele-
vated position, DO NOT operate the wheelchair. Have the wheelchair serviced
immediately by a qualified technician.
Pronto® M50™, M51™and M61™with SureStep™
FIGURE 5.6 Using the Horn - M50 and
FIGURE 5.7 Using the Horn - M61
WARNING
34
M51 Wheelchairs
Horn
Button
Wheelchairs
Part No. 1125085
Horn
Button