Removing; Positioning/Adjusting Flip Back Armrests; Positioning Flip Back Armrests For User Transfer - Invacare Pronto M50 Owner's Manual

SECTION 6—ARMS

Removing

1. Unlock flip back armrest by pulling flip back armrest release lever into the unlocked
(horizontal) position.
2. Remove the quick release pin that secures the flip back armrest to the wheelchair
frame.
3. Pull up on the flip back armrest and remove the armrest from the arm sockets.
4. Repeat STEPS 1-3 for the opposite flip back armrest, if necessary.
Flip Back Armrest
Rear Arm Socket
Quick Release Pin
FIGURE 6.5 Installing/Removing Flip Back Armrests

Positioning/Adjusting Flip Back Armrests

NOTE: For this procedure, refer to FIGURE 6.6.

Positioning Flip Back Armrests for User Transfer

1. Unlock the flip back armrest by pulling the armrest release lever into the up
(horizontal) position.
2. Pull up on the flip back armrest and remove the armrest from the front arm socket.
3. Continue to pull up on the flip back armrest until the armrest is out of the way.
4. Repeat STEPS 1-3 for opposite flip back armrest, if necessary.
Pronto® M50™, M51™and M61™with SureStep™
Flip Back Armrest
Release Lever
Front Arm Socket
46
Locked
(Vertical)
Unlocked
(Horizontal)
Seat Frame
Part No. 1125085