Invacare Pronto M50 Owner's Manual page 81

8. Position the batteries into the wheelchair. Refer to Removing/Installing Batteries from/
into Battery Tray on page 77.
NOTE: New Battery(ies) MUST be fully charged before using, otherwise the life of the battery(ies)
will be reduced.
9. If necessary, charge the battery(ies). Refer to Charging Batteries on page 82.
To BLACK and RED Connectors
POSITIVE (+) Battery
Terminal Cap
RED Battery Cable
POSITIVE (+) Battery
Terminal/Post
NOTE: Handles on batteries
removed for clarity.
NEGATIVE (-) Battery
POSITIVE
(+) Battery
Terminal
U1 Battery
NOTE: Handles on batteries removed for clarity.
FIGURE 11.4 Connecting/Disconnecting Battery Cables
Part No. 1125085
DETAIL "A"
DETAIL "B"
Terminal
Tie-
wraps
BLACK
Connectors
81
SECTION 11—BATTERIES
NEGATIVE (-) Battery
Terminal Cap
BLACK Battery Cable
NEGATIVE (-) Battery
Terminal/Post
U1 Battery
RED Connectors
U1 Batteries
Pronto® M50™, M51™and M61™with SureStep™
Locknut
BLACK
Connector to
Controller
Plug into
controller