Invacare Pronto M50 Owner's Manual page 35

NOTE: For this procedure, refer to FIGURE 5.8.
NOTE: This procedure applies to M61 wheelchairs only.
1. Make sure the wheelchair is on a level surface.
2. Press the mode button to switch from driving mode to elevate mode.
NOTE: The LED will light up with a circle around it.
3. Move the joystick:
• Forward - Elevates the seat.
• Backward - Lowers the seat.
Elevated Seat
Part No. 1125085
SECTION 5—WHEELCHAIR OPERATION
FIGURE 5.8 Elevating the Seat
35
Pronto® M50™, M51™and M61™with SureStep™
Selected
Drive
Mode
Joystick
Mode
Button
Elevate
the Seat
Lower
the Seat