Adjusting Remote Width; Adjusting The Quad Link Remote Support; Adjusting Remote Height; Adjusting Remote Position - Invacare Captain's Seat User Manual

4.2.1 Adjusting Remote Width

1. Loosen the screws A.
2. Adjust remote B to desired width.
3. Re-tighten the screws.

4.3 Adjusting the Quad Link Remote Support

60101876-C

4.3.1 Adjusting Remote Height

1. Loosen the two set screws A on the remote mount.
2. Push or pull the remote mounting tube up or down to the
desired height.
3. Tighten the two set screws on the remote mount.

4.3.2 Adjusting Remote Position

Perform this procedure to adjust the position of the remote on
the Quad Link.
4 Setup
23