Adjusting Seat Depth; Asba Seat; Van Seat - Invacare Pronto M50 Owner's Manual

Adjusting Seat Depth

ASBA Seat

DO NOT attempt to adjust the seat position of the ASBA seat on the seat base.
This procedure MUST be performed by a qualified technician.

Van Seat

NOTE: For this procedure, refer to FIGURE 7.5.
1. Remove the seat. Refer to Removing/Installing the Seat Assembly on page 50.
2. Perform one (1) of the following:
• For Standard Van Seat -
i. Remove the seat base from the seat assembly. Refer to Adjusting Seat Position
on Seat Base on page 57.
ii. Go to STEP 3.
• For Office Style Seat - Go to STEP 3.
3. Remove the six (6) mounting screws located under the seat that secure the seat back
assembly in place.
4. Adjust seat back assembly to desired position and reinstall the six (6) mounting
screws. Securely tighten.
NOTE: Refer to Detail "A" of FIGURE 7.5 for proper seat depth positions. For example, to achieve
maximum seat depth, the front mounting hole on the seat back bracket aligns with the third hole
on the seat base.
5. Perform one (1) of the following:
• For Standard Van Seat -
i. Install the seat base onto the seat assembly. Refer to Adjusting Seat Position on
Seat Base on page 57.
ii. Go to STEP 6.
• For Office Style Seat - Go to STEP 6.
6. Reinstall the seat base onto the seat assembly. Refer to Adjusting Seat Position on Seat
Base on page 57.
7. Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 50.
Part No. 1125085
WARNING
51
Pronto® M50™, M51™and M61™with SureStep™
SECTION 7—SEAT