Setup; Setup/Delivery Inspection Information; Adjusting The Joystick Mount; Adjusting The Height Of The Joystick Mount - Invacare TDXSP2X-CG User Manual

Power wheelchair base

Table of Contents

5 Setup

Setup/delivery inspection should be performed by provider at time of delivery/setup.

PROVIDERS — Refer to 10.2 Setup/Delivery Inspection, page 41 for a setup/delivery inspection checklist.

Initial adjustments should be made to suit your personal body structure needs and preference. Thereafter

weekly, monthly and periodic inspections should be performed by user/attendant between the six month

service inspections. Refer to Chapter 9 Maintenance, page 36.

You can adjust the height of the nucleus midline holder in two ways:

Adjust it together with the armrest height. Refer to the user manual for the seating system.

Adjust the height of the nucleus midline holder only. Refer to section below.

3/16" (4.8 mm) Allen key

1. Loosen screw A.

2. Adjust nucleus to desired height.

3. Tighten screw.

1. Loosen lever A.

2. Shift midline holder to desired position.

3. Tighten lever.

60101831-I

Fig. 5-1

Fig. 5-2

Invacare® TDX® SP2 Series

Table of Contents

Tdxsp2 Tdxsp2-cg Tdx sp2 series Tdxsp2-mcg Tdxsp2x-mcg