Life Fitness LS 9100 Service Manual page 36

Life Fitness 9100/9500HR Belt Drive Stairclimbers
DIAGNOSTIC MODE
(Small Display)
ACCESS AND EXECUTION
Diagnostic State 5 – Program Duration
Program duration is used to set the length of time. Its default setting is 60 minutes and is adjustable between 10-99
minutes. Using the up / down arrows will allow the time to be increased or decreased in increments of one minute.
Holding the arrow keys will allow the operator to scroll quickly through the time settings.
Press the Start / Enter key to scroll forward to Diagnostic State 6 or press the Clear / Pause key to scroll backwards
to Diagnostic State 4.
Diagnostic State 6 - Telemetry
The Telemetry mode is recognized by the heart shaped LED's in the program profile window and can be activated or
deactivated by pressing the up arrow key for On and the down arrow key for Off.
Press the Start / Enter key to scroll forward to Diagnostic State 7 or press the Clear / Pause key to scroll backwards
to Diagnostic State 5.
Diagnostic State 7 – English or Metric Units
To select English (default setting) or Metric units press the up arrow key for English and the down arrow key for
Metric.
Press the Start / Enter key to scroll forward to Diagnostic State 8or press the Clear / Pause key to scroll backwards
to Diagnostic State 6.
Diagnostic State 8 – Watts (On / Off)
The Watts mode can be activated or deactivated by pressing the up arrow key for On and the down arrow key for Off.
Press the Start / Enter key to scroll forward to Diagnostic State 9 or press the Clear / Pause key to scroll backwards
to Diagnostic State 7.
Diagnostic State 9 – Metts (On / Off)
The Metts mode shows the workload (optional). This mode can be activated or deactivated by pressing the up arrow
key for On and the down arrow key for Off (default).
Press the Start / Enter key to scroll forward to Diagnostic State 10 or press the Clear / Pause key to scroll backwards
to Diagnostic State 8.
13