Life Fitness 9100/9500HR Belt Drive Stairclimbers
DIAGNOSTIC MODE
ACCESS AND EXECUTION
General Information
There are 12 diagnostic States, which can be accessed to confirm or change current program settings. They are as follows.
Diagnostic State 1 LED's / Keypad Test
To access Diagnostic state 1(9500HRT), press and hold down the number 5 key while pressing the Clear / Pause key
twice. All the LED's should illuminate on the status displays.
To access Diagnostic State 1(9100T), press and hold down the number the arrow down key while pressing the Clear /
Pause key twice. All the LED's should illuminate on the status displays.
Pressing each numeric and function key will display its value across the status screen. (Numeric keys on 9500HRT
only)
KEYS
0 1 2 3 4 5 6 7 8 9
Display
0 1 2 3 4 5 6 7 8 9
Press the Start / Enter key to scroll forward to Diagnostic State 2, or press the Clear/pause key to exit
and return back to the user display.
(Small Display)
Diagnostic State 1
Diagnostic State 2
Diagnostic State 3
Diagnostic State 4
Diagnostic State 5
Diagnostic State 6
Diagnostic State 7
Diagnostic State 8
Diagnostic State 9
Diagnostic State 10
Diagnostic State 11
Diagnostic State 12
Display Lock
L
LED's / Keypad
Individual LED's
Software Version, RPM, HR, Load
Network / Lifepulse
Program Duration
Telemetry
English / Metric
Watts
Mets
Total Hours
Model Selection
Photoshoot
Climbing / Pace
Watts / Metts
P
Quick Start
W
Q
UP
DOWN
U
D
11