Shutting Down The Server Blade - Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual

4.3

Shutting down the server blade

V
CAUTION!
For further safety information, please refer to chapter
information" on page
Ê Inform the system administrator that the server blade will be shut down and
put offline.
Ê Terminate all applications.
Ê Verify if your backup software solution requires preparative configuration
before starting the procedure as described in section
configuring the backup software solution" on page
Ê In case of Multipath I/O environments, please refer to section
server maintenance in a Multipath I/O environment" on page
Figure 7: Power button on the front panel
Ê Shut down the server blade by pressing the On / Off button (1). The power
indicator (2) turns off.
I
If the system is running an ACPI-compliant operating system,
pressing the On / Off button will perform a graceful shutdown.
Ê Switch on the ID indicator on the front panel of the server blade as described
in section "Locating the defective server blade" on page
BX920 S3
33.
Upgrade and Maintenance Manual
Basic hardware procedures
"Important
"Verifying and
86.
"Note on
74.
47.
55