Removing A Memory Module - Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual

Main memory
8.3.3

Removing a memory module

Ê Identify the desired memory slot according to the mounting order described
in section "Memory sequence" on page
V
CAUTION!
Ensure to maintain an operational configuration when removing
memory modules. For additional information, please refer to section
"Memory sequence" on page
Ê If required, remove the mezzanine carrier for better handling of the DIMMs
of CPU 1.
Figure 60: Opening the securing clips
Ê Eject the desired memory module by pressing out the securing clips at each
end of the memory module connector.
Figure 61: Removing memory modules
Ê Remove the ejected memory module.
176 Upgrade and Maintenance Manual
164.
164.
BX920 S3